Merge pull request #274 from fwq418233640/master

我为FastDFS 增加了 Docker的安装方式

docker/dockerfile_local/Dockerfile

@@ -0,0 +1,42 @@
+# centos 7
+FROM centos
+# 添加配置文件
+# add profiles
+ADD conf/client.conf /etc/fdfs/
+ADD conf/http.conf /etc/fdfs/
+ADD conf/mime.types /etc/fdfs/
+ADD conf/storage.conf /etc/fdfs/
+ADD conf/tracker.conf /etc/fdfs/
+ADD fastdfs.sh /home
+ADD conf/nginx.conf /etc/fdfs/
+ADD conf/mod_fastdfs.conf /etc/fdfs
+
+# 添加源文件
+# add source code
+ADD source/libfastcommon.tar.gz /usr/local/src/
+ADD source/fastdfs.tar.gz /usr/local/src/
+ADD source/fastdfs-nginx-module.tar.gz /usr/local/src/
+ADD source/nginx-1.15.4.tar.gz /usr/local/src/
+
+# Run
+RUN yum install git gcc gcc-c ++ make automake autoconf libtool pcre pcre-devel zlib zlib-devel openssl-devel wget vim -y \
+  &&  mkdir /home/dfs   \
+  &&  cd /usr/local/src/  \
+  &&  cd libfastcommon/   \
+  &&  ./make.sh && ./make.sh install  \
+  &&  cd ../  \
+  &&  cd fastdfs/   \
+  &&  ./make.sh && ./make.sh install  \
+  &&  cd ../  \
+  &&  cd nginx-1.15.4/  \
+  &&  ./configure --add-module=/usr/local/src/fastdfs-nginx-module/src/   \
+  &&  make && make install  \
+  &&  chmod +x /home/fastdfs.sh
+
+
+# export config
+VOLUME /etc/fdfs
+
+
+EXPOSE 2122 23000 8888 80
+ENTRYPOINT ["/home/fastdfs.sh"]

docker/dockerfile_local/README.md

@@ -0,0 +1,49 @@
+# FastDFS Dockerfile local (本地版本)
+
+## 声明
+其实并没什么区别 教程是在上一位huayanYu(小锅盖)和 Wiki的作者 的基础上进行了一些修改，本质上还是huayanYu(小锅盖) 和 Wiki 上的作者写的教程
+
+
+## 目录介绍
+### conf 
+Dockerfile 所需要的一些配置文件
+当然你也可以对这些文件进行一些修改  比如 storage.conf 里面的 bast_path 等相关
+
+### source 
+FastDFS 所需要的一些需要从网上下载的包(包括 FastDFS 本身) ,因为天朝网络原因 导致 build 镜像的时候各种出错
+所以干脆提前下载下来了 . 
+
+
+## 使用方法
+需要注意的是 你需要在运行容器的时候制定宿主机的ip 用参数 FASTDFS_IPADDR 来指定
+下面有一条docker run 的示例指令
+
+```
+docker run -d -e FASTDFS_IPADDR=192.168.1.234 -p 8888:8888 -p 22122:22122 -p 23000:23000 -p 8011:80 --name test-fast 镜像id/镜像名称
+```
+
+## 后记
+本质上 local 版本与  network 版本无区别
+
+
+## Statement
+In fact, there is no difference between the tutorials written by Huayan Yu and Wiki on the basis of their previous authors. In essence, they are also tutorials written by the authors of Huayan Yu and Wiki.
+
+## Catalogue introduction
+### conf 
+Dockerfile Some configuration files needed
+Of course, you can also make some modifications to these files, such as bast_path in storage. conf, etc.
+
+### source 
+FastDFS Some of the packages that need to be downloaded from the Internet (including FastDFS itself) are due to various errors in building mirrors due to the Tianchao network
+So I downloaded it in advance. 
+
+## Usage method
+Note that you need to specify the host IP when running the container with the parameter FASTDFS_IPADDR
+Here's a sample docker run instruction
+```
+docker run -d -e FASTDFS_IPADDR=192.168.1.234 -p 8888:8888 -p 22122:22122 -p 23000:23000 -p 8011:80 --name test-fast 镜像id/镜像名称
+```
+
+## Epilogue
+Essentially, there is no difference between the local version and the network version.

docker/dockerfile_local/conf/client.conf

@@ -0,0 +1,62 @@
+# connect timeout in seconds
+# default value is 30s
+connect_timeout=30
+
+# network timeout in seconds
+# default value is 30s
+network_timeout=60
+
+# the base path to store log files
+base_path=/home/dfs
+
+# tracker_server can ocur more than once, and tracker_server format is
+#  "host:port", host can be hostname or ip address
+tracker_server=com.ikingtech.ch116221:22122
+
+#standard log level as syslog, case insensitive, value list:
+### emerg for emergency
+### alert
+### crit for critical
+### error
+### warn for warning
+### notice
+### info
+### debug
+log_level=info
+
+# if use connection pool
+# default value is false
+# since V4.05
+use_connection_pool = false
+
+# connections whose the idle time exceeds this time will be closed
+# unit: second
+# default value is 3600
+# since V4.05
+connection_pool_max_idle_time = 3600
+
+# if load FastDFS parameters from tracker server
+# since V4.05
+# default value is false
+load_fdfs_parameters_from_tracker=false
+
+# if use storage ID instead of IP address
+# same as tracker.conf
+# valid only when load_fdfs_parameters_from_tracker is false
+# default value is false
+# since V4.05
+use_storage_id = false
+
+# specify storage ids filename, can use relative or absolute path
+# same as tracker.conf
+# valid only when load_fdfs_parameters_from_tracker is false
+# since V4.05
+storage_ids_filename = storage_ids.conf
+
+
+#HTTP settings
+http.tracker_server_port=80
+
+#use "#include" directive to include HTTP other settiongs
+##include http.conf
+

docker/dockerfile_local/conf/http.conf

@@ -0,0 +1,29 @@
+# HTTP default content type
+http.default_content_type = application/octet-stream
+
+# MIME types mapping filename
+# MIME types file format: MIME_type  extensions
+# such as:  image/jpeg	jpeg jpg jpe
+# you can use apache's MIME file: mime.types
+http.mime_types_filename=mime.types
+
+# if use token to anti-steal
+# default value is false (0)
+http.anti_steal.check_token=false
+
+# token TTL (time to live), seconds
+# default value is 600
+http.anti_steal.token_ttl=900
+
+# secret key to generate anti-steal token
+# this parameter must be set when http.anti_steal.check_token set to true
+# the length of the secret key should not exceed 128 bytes
+http.anti_steal.secret_key=FastDFS1234567890
+
+# return the content of the file when check token fail
+# default value is empty (no file sepecified)
+http.anti_steal.token_check_fail=/home/yuqing/fastdfs/conf/anti-steal.jpg
+
+# if support multi regions for HTTP Range
+# default value is true
+http.multi_range.enabed = true

docker/dockerfile_local/conf/mod_fastdfs.conf

@@ -0,0 +1,133 @@
+# connect timeout in seconds
+# default value is 30s
+connect_timeout=2
+
+# network recv and send timeout in seconds
+# default value is 30s
+network_timeout=30
+
+# the base path to store log files
+base_path=/tmp
+
+# if load FastDFS parameters from tracker server
+# since V1.12
+# default value is false
+load_fdfs_parameters_from_tracker=true
+
+# storage sync file max delay seconds
+# same as tracker.conf
+# valid only when load_fdfs_parameters_from_tracker is false
+# since V1.12
+# default value is 86400 seconds (one day)
+storage_sync_file_max_delay = 86400
+
+# if use storage ID instead of IP address
+# same as tracker.conf
+# valid only when load_fdfs_parameters_from_tracker is false
+# default value is false
+# since V1.13
+use_storage_id = false
+
+# specify storage ids filename, can use relative or absolute path
+# same as tracker.conf
+# valid only when load_fdfs_parameters_from_tracker is false
+# since V1.13
+storage_ids_filename = storage_ids.conf
+
+# FastDFS tracker_server can ocur more than once, and tracker_server format is
+#  "host:port", host can be hostname or ip address
+# valid only when load_fdfs_parameters_from_tracker is true
+tracker_server=com.ikingtech.ch116221:22122
+
+# the port of the local storage server
+# the default value is 23000
+storage_server_port=23000
+
+# the group name of the local storage server
+group_name=group1
+
+# if the url / uri including the group name
+# set to false when uri like /M00/00/00/xxx
+# set to true when uri like ${group_name}/M00/00/00/xxx, such as group1/M00/xxx
+# default value is false
+url_have_group_name = true
+
+# path(disk or mount point) count, default value is 1
+# must same as storage.conf
+store_path_count=1
+
+# store_path#, based 0, if store_path0 not exists, it's value is base_path
+# the paths must be exist
+# must same as storage.conf
+store_path0=/home/dfs
+#store_path1=/home/yuqing/fastdfs1
+
+# standard log level as syslog, case insensitive, value list:
+### emerg for emergency
+### alert
+### crit for critical
+### error
+### warn for warning
+### notice
+### info
+### debug
+log_level=info
+
+# set the log filename, such as /usr/local/apache2/logs/mod_fastdfs.log
+# empty for output to stderr (apache and nginx error_log file)
+log_filename=
+
+# response mode when the file not exist in the local file system
+## proxy: get the content from other storage server, then send to client
+## redirect: redirect to the original storage server (HTTP Header is Location)
+response_mode=proxy
+
+# the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a
+# multi aliases split by comma. empty value means auto set by OS type
+# this paramter used to get all ip address of the local host
+# default values is empty
+if_alias_prefix=
+
+# use "#include" directive to include HTTP config file
+# NOTE: #include is an include directive, do NOT remove the # before include
+#include http.conf
+
+
+# if support flv
+# default value is false
+# since v1.15
+flv_support = true
+
+# flv file extension name
+# default value is flv
+# since v1.15
+flv_extension = flv
+
+
+# set the group count
+# set to none zero to support multi-group on this storage server
+# set to 0  for single group only
+# groups settings section as [group1], [group2], ..., [groupN]
+# default value is 0
+# since v1.14
+group_count = 0
+
+# group settings for group #1
+# since v1.14
+# when support multi-group on this storage server, uncomment following section
+#[group1]
+#group_name=group1
+#storage_server_port=23000
+#store_path_count=2
+#store_path0=/home/yuqing/fastdfs
+#store_path1=/home/yuqing/fastdfs1
+
+# group settings for group #2
+# since v1.14
+# when support multi-group, uncomment following section as neccessary
+#[group2]
+#group_name=group2
+#storage_server_port=23000
+#store_path_count=1
+#store_path0=/home/yuqing/fastdfs
+

docker/dockerfile_local/conf/nginx.conf

@@ -0,0 +1,127 @@
+
+#user  nobody;
+worker_processes  1;
+
+#error_log  logs/error.log;
+#error_log  logs/error.log  notice;
+#error_log  logs/error.log  info;
+
+#pid        logs/nginx.pid;
+
+
+events {
+    worker_connections  1024;
+}
+
+
+http {
+    include       mime.types;
+    default_type  application/octet-stream;
+
+    #log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
+    #                  '$status $body_bytes_sent "$http_referer" '
+    #                  '"$http_user_agent" "$http_x_forwarded_for"';
+
+    #access_log  logs/access.log  main;
+
+    sendfile        on;
+    #tcp_nopush     on;
+
+    #keepalive_timeout  0;
+    keepalive_timeout  65;
+
+    #gzip  on;
+
+    server {
+        listen       80;
+        server_name  localhost;
+
+        #charset koi8-r;
+
+        #access_log  logs/host.access.log  main;
+
+        location / {
+            root   html;
+            index  index.html index.htm;
+        }
+
+        #error_page  404              /404.html;
+
+        # redirect server error pages to the static page /50x.html
+        #
+        error_page   500 502 503 504  /50x.html;
+        location = /50x.html {
+            root   html;
+        }
+
+        # proxy the PHP scripts to Apache listening on 127.0.0.1:80
+        #
+        #location ~ \.php$ {
+        #    proxy_pass   http://127.0.0.1;
+        #}
+
+        # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
+        #
+        #location ~ \.php$ {
+        #    root           html;
+        #    fastcgi_pass   127.0.0.1:9000;
+        #    fastcgi_index  index.php;
+        #    fastcgi_param  SCRIPT_FILENAME  /scripts$fastcgi_script_name;
+        #    include        fastcgi_params;
+        #}
+
+        # deny access to .htaccess files, if Apache's document root
+        # concurs with nginx's one
+        #
+        #location ~ /\.ht {
+        #    deny  all;
+        #}
+    }
+    server {
+        listen       8888;
+        server_name  localhost;
+        location ~/group[0-9]/ {
+            ngx_fastdfs_module;
+        }
+        error_page   500 502 503 504  /50x.html;
+        location = /50x.html {
+        root   html;
+        }
+    }
+
+    # another virtual host using mix of IP-, name-, and port-based configuration
+    #
+    #server {
+    #    listen       8000;
+    #    listen       somename:8080;
+    #    server_name  somename  alias  another.alias;
+
+    #    location / {
+    #        root   html;
+    #        index  index.html index.htm;
+    #    }
+    #}
+
+
+    # HTTPS server
+    #
+    #server {
+    #    listen       443 ssl;
+    #    server_name  localhost;
+
+    #    ssl_certificate      cert.pem;
+    #    ssl_certificate_key  cert.key;
+
+    #    ssl_session_cache    shared:SSL:1m;
+    #    ssl_session_timeout  5m;
+
+    #    ssl_ciphers  HIGH:!aNULL:!MD5;
+    #    ssl_prefer_server_ciphers  on;
+
+    #    location / {
+    #        root   html;
+    #        index  index.html index.htm;
+    #    }
+    #}
+
+}

docker/dockerfile_local/conf/storage.conf

@@ -0,0 +1,287 @@
+# is this config file disabled
+# false for enabled
+# true for disabled
+disabled=false
+
+# the name of the group this storage server belongs to
+#
+# comment or remove this item for fetching from tracker server,
+# in this case, use_storage_id must set to true in tracker.conf,
+# and storage_ids.conf must be configed correctly.
+group_name=group1
+
+# bind an address of this host
+# empty for bind all addresses of this host
+bind_addr=
+
+# if bind an address of this host when connect to other servers 
+# (this storage server as a client)
+# true for binding the address configed by above parameter: "bind_addr"
+# false for binding any address of this host
+client_bind=true
+
+# the storage server port
+port=23000
+
+# connect timeout in seconds
+# default value is 30s
+connect_timeout=10
+
+# network timeout in seconds
+# default value is 30s
+network_timeout=60
+
+# heart beat interval in seconds
+heart_beat_interval=30
+
+# disk usage report interval in seconds
+stat_report_interval=60
+
+# the base path to store data and log files
+base_path=/home/dfs
+
+# max concurrent connections the server supported
+# default value is 256
+# more max_connections means more memory will be used
+# you should set this parameter larger, eg. 10240
+max_connections=1024
+
+# the buff size to recv / send data
+# this parameter must more than 8KB
+# default value is 64KB
+# since V2.00
+buff_size = 256KB
+
+# accept thread count
+# default value is 1
+# since V4.07
+accept_threads=1
+
+# work thread count, should <= max_connections
+# work thread deal network io
+# default value is 4
+# since V2.00
+work_threads=4
+
+# if disk read / write separated
+##  false for mixed read and write
+##  true for separated read and write
+# default value is true
+# since V2.00
+disk_rw_separated = true
+
+# disk reader thread count per store base path
+# for mixed read / write, this parameter can be 0
+# default value is 1
+# since V2.00
+disk_reader_threads = 1
+
+# disk writer thread count per store base path
+# for mixed read / write, this parameter can be 0
+# default value is 1
+# since V2.00
+disk_writer_threads = 1
+
+# when no entry to sync, try read binlog again after X milliseconds
+# must > 0, default value is 200ms
+sync_wait_msec=50
+
+# after sync a file, usleep milliseconds
+# 0 for sync successively (never call usleep)
+sync_interval=0
+
+# storage sync start time of a day, time format: Hour:Minute
+# Hour from 0 to 23, Minute from 0 to 59
+sync_start_time=00:00
+
+# storage sync end time of a day, time format: Hour:Minute
+# Hour from 0 to 23, Minute from 0 to 59
+sync_end_time=23:59
+
+# write to the mark file after sync N files
+# default value is 500
+write_mark_file_freq=500
+
+# path(disk or mount point) count, default value is 1
+store_path_count=1
+
+# store_path#, based 0, if store_path0 not exists, it's value is base_path
+# the paths must be exist
+store_path0=/home/dfs
+#store_path1=/home/dfs2
+
+# subdir_count  * subdir_count directories will be auto created under each 
+# store_path (disk), value can be 1 to 256, default value is 256
+subdir_count_per_path=256
+
+# tracker_server can ocur more than once, and tracker_server format is
+#  "host:port", host can be hostname or ip address
+tracker_server=com.ikingtech.ch116221:22122
+
+
+#standard log level as syslog, case insensitive, value list:
+### emerg for emergency
+### alert
+### crit for critical
+### error
+### warn for warning
+### notice
+### info
+### debug
+log_level=info
+
+#unix group name to run this program, 
+#not set (empty) means run by the group of current user
+run_by_group=
+
+#unix username to run this program,
+#not set (empty) means run by current user
+run_by_user=
+
+# allow_hosts can ocur more than once, host can be hostname or ip address,
+# "*" (only one asterisk) means match all ip addresses
+# we can use CIDR ips like 192.168.5.64/26
+# and also use range like these: 10.0.1.[0-254] and host[01-08,20-25].domain.com
+# for example:
+# allow_hosts=10.0.1.[1-15,20]
+# allow_hosts=host[01-08,20-25].domain.com
+# allow_hosts=192.168.5.64/26
+allow_hosts=*
+
+# the mode of the files distributed to the data path
+# 0: round robin(default)
+# 1: random, distributted by hash code
+file_distribute_path_mode=0
+
+# valid when file_distribute_to_path is set to 0 (round robin), 
+# when the written file count reaches this number, then rotate to next path
+# default value is 100
+file_distribute_rotate_count=100
+
+# call fsync to disk when write big file
+# 0: never call fsync
+# other: call fsync when written bytes >= this bytes
+# default value is 0 (never call fsync)
+fsync_after_written_bytes=0
+
+# sync log buff to disk every interval seconds
+# must > 0, default value is 10 seconds
+sync_log_buff_interval=10
+
+# sync binlog buff / cache to disk every interval seconds
+# default value is 60 seconds
+sync_binlog_buff_interval=10
+
+# sync storage stat info to disk every interval seconds
+# default value is 300 seconds
+sync_stat_file_interval=300
+
+# thread stack size, should >= 512KB
+# default value is 512KB
+thread_stack_size=512KB
+
+# the priority as a source server for uploading file.
+# the lower this value, the higher its uploading priority.
+# default value is 10
+upload_priority=10
+
+# the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a
+# multi aliases split by comma. empty value means auto set by OS type
+# default values is empty
+if_alias_prefix=
+
+# if check file duplicate, when set to true, use FastDHT to store file indexes
+# 1 or yes: need check
+# 0 or no: do not check
+# default value is 0
+check_file_duplicate=0
+
+# file signature method for check file duplicate
+## hash: four 32 bits hash code
+## md5: MD5 signature
+# default value is hash
+# since V4.01
+file_signature_method=hash
+
+# namespace for storing file indexes (key-value pairs)
+# this item must be set when check_file_duplicate is true / on
+key_namespace=FastDFS
+
+# set keep_alive to 1 to enable persistent connection with FastDHT servers
+# default value is 0 (short connection)
+keep_alive=0
+
+# you can use "#include filename" (not include double quotes) directive to 
+# load FastDHT server list, when the filename is a relative path such as 
+# pure filename, the base path is the base path of current/this config file.
+# must set FastDHT server list when check_file_duplicate is true / on
+# please see INSTALL of FastDHT for detail
+##include /home/yuqing/fastdht/conf/fdht_servers.conf
+
+# if log to access log
+# default value is false
+# since V4.00
+use_access_log = false
+
+# if rotate the access log every day
+# default value is false
+# since V4.00
+rotate_access_log = false
+
+# rotate access log time base, time format: Hour:Minute
+# Hour from 0 to 23, Minute from 0 to 59
+# default value is 00:00
+# since V4.00
+access_log_rotate_time=00:00
+
+# if rotate the error log every day
+# default value is false
+# since V4.02
+rotate_error_log = false
+
+# rotate error log time base, time format: Hour:Minute
+# Hour from 0 to 23, Minute from 0 to 59
+# default value is 00:00
+# since V4.02
+error_log_rotate_time=00:00
+
+# rotate access log when the log file exceeds this size
+# 0 means never rotates log file by log file size
+# default value is 0
+# since V4.02
+rotate_access_log_size = 0
+
+# rotate error log when the log file exceeds this size
+# 0 means never rotates log file by log file size
+# default value is 0
+# since V4.02
+rotate_error_log_size = 0
+
+# keep days of the log files
+# 0 means do not delete old log files
+# default value is 0
+log_file_keep_days = 0
+
+# if skip the invalid record when sync file
+# default value is false
+# since V4.02
+file_sync_skip_invalid_record=false
+
+# if use connection pool
+# default value is false
+# since V4.05
+use_connection_pool = false
+
+# connections whose the idle time exceeds this time will be closed
+# unit: second
+# default value is 3600
+# since V4.05
+connection_pool_max_idle_time = 3600
+
+# use the ip address of this storage server if domain_name is empty,
+# else this domain name will ocur in the url redirected by the tracker server
+http.domain_name=
+
+# the port of the web server on this storage server
+http.server_port=8888
+

docker/dockerfile_local/conf/tracker.conf

@@ -0,0 +1,278 @@
+# is this config file disabled
+# false for enabled
+# true for disabled
+disabled=false
+
+# bind an address of this host
+# empty for bind all addresses of this host
+bind_addr=
+
+# the tracker server port
+port=22122
+
+# connect timeout in seconds
+# default value is 30s
+connect_timeout=10
+
+# network timeout in seconds
+# default value is 30s
+network_timeout=60
+
+# the base path to store data and log files
+base_path=/home/dfs
+
+# max concurrent connections this server supported
+# you should set this parameter larger, eg. 102400
+max_connections=1024
+
+# accept thread count
+# default value is 1
+# since V4.07
+accept_threads=1
+
+# work thread count, should <= max_connections
+# default value is 4
+# since V2.00
+work_threads=4
+
+# min buff size
+# default value 8KB
+min_buff_size = 8KB
+
+# max buff size
+# default value 128KB
+max_buff_size = 128KB
+
+# the method of selecting group to upload files
+# 0: round robin
+# 1: specify group
+# 2: load balance, select the max free space group to upload file
+store_lookup=2
+
+# which group to upload file
+# when store_lookup set to 1, must set store_group to the group name
+store_group=group2
+
+# which storage server to upload file
+# 0: round robin (default)
+# 1: the first server order by ip address
+# 2: the first server order by priority (the minimal)
+# Note: if use_trunk_file set to true, must set store_server to 1 or 2
+store_server=0
+
+# which path(means disk or mount point) of the storage server to upload file
+# 0: round robin
+# 2: load balance, select the max free space path to upload file
+store_path=0
+
+# which storage server to download file
+# 0: round robin (default)
+# 1: the source storage server which the current file uploaded to
+download_server=0
+
+# reserved storage space for system or other applications.
+# if the free(available) space of any stoarge server in 
+# a group <= reserved_storage_space, 
+# no file can be uploaded to this group.
+# bytes unit can be one of follows:
+### G or g for gigabyte(GB)
+### M or m for megabyte(MB)
+### K or k for kilobyte(KB)
+### no unit for byte(B)
+### XX.XX% as ratio such as reserved_storage_space = 10%
+reserved_storage_space = 1%
+
+#standard log level as syslog, case insensitive, value list:
+### emerg for emergency
+### alert
+### crit for critical
+### error
+### warn for warning
+### notice
+### info
+### debug
+log_level=info
+
+#unix group name to run this program, 
+#not set (empty) means run by the group of current user
+run_by_group=
+
+#unix username to run this program,
+#not set (empty) means run by current user
+run_by_user=
+
+# allow_hosts can ocur more than once, host can be hostname or ip address,
+# "*" (only one asterisk) means match all ip addresses
+# we can use CIDR ips like 192.168.5.64/26
+# and also use range like these: 10.0.1.[0-254] and host[01-08,20-25].domain.com
+# for example:
+# allow_hosts=10.0.1.[1-15,20]
+# allow_hosts=host[01-08,20-25].domain.com
+# allow_hosts=192.168.5.64/26
+allow_hosts=*
+
+# sync log buff to disk every interval seconds
+# default value is 10 seconds
+sync_log_buff_interval = 10
+
+# check storage server alive interval seconds
+check_active_interval = 120
+
+# thread stack size, should >= 64KB
+# default value is 64KB
+thread_stack_size = 64KB
+
+# auto adjust when the ip address of the storage server changed
+# default value is true
+storage_ip_changed_auto_adjust = true
+
+# storage sync file max delay seconds
+# default value is 86400 seconds (one day)
+# since V2.00
+storage_sync_file_max_delay = 86400
+
+# the max time of storage sync a file
+# default value is 300 seconds
+# since V2.00
+storage_sync_file_max_time = 300
+
+# if use a trunk file to store several small files
+# default value is false
+# since V3.00
+use_trunk_file = false 
+
+# the min slot size, should <= 4KB
+# default value is 256 bytes
+# since V3.00
+slot_min_size = 256
+
+# the max slot size, should > slot_min_size
+# store the upload file to trunk file when it's size <=  this value
+# default value is 16MB
+# since V3.00
+slot_max_size = 16MB
+
+# the trunk file size, should >= 4MB
+# default value is 64MB
+# since V3.00
+trunk_file_size = 64MB
+
+# if create trunk file advancely
+# default value is false
+# since V3.06
+trunk_create_file_advance = false
+
+# the time base to create trunk file
+# the time format: HH:MM
+# default value is 02:00
+# since V3.06
+trunk_create_file_time_base = 02:00
+
+# the interval of create trunk file, unit: second
+# default value is 38400 (one day)
+# since V3.06
+trunk_create_file_interval = 86400
+
+# the threshold to create trunk file
+# when the free trunk file size less than the threshold, will create 
+# the trunk files
+# default value is 0
+# since V3.06
+trunk_create_file_space_threshold = 20G
+
+# if check trunk space occupying when loading trunk free spaces
+# the occupied spaces will be ignored
+# default value is false
+# since V3.09
+# NOTICE: set this parameter to true will slow the loading of trunk spaces 
+# when startup. you should set this parameter to true when neccessary.
+trunk_init_check_occupying = false
+
+# if ignore storage_trunk.dat, reload from trunk binlog
+# default value is false
+# since V3.10
+# set to true once for version upgrade when your version less than V3.10
+trunk_init_reload_from_binlog = false
+
+# the min interval for compressing the trunk binlog file
+# unit: second
+# default value is 0, 0 means never compress
+# FastDFS compress the trunk binlog when trunk init and trunk destroy
+# recommand to set this parameter to 86400 (one day)
+# since V5.01
+trunk_compress_binlog_min_interval = 0
+
+# if use storage ID instead of IP address
+# default value is false
+# since V4.00
+use_storage_id = false
+
+# specify storage ids filename, can use relative or absolute path
+# since V4.00
+storage_ids_filename = storage_ids.conf
+
+# id type of the storage server in the filename, values are:
+## ip: the ip address of the storage server
+## id: the server id of the storage server
+# this paramter is valid only when use_storage_id set to true
+# default value is ip
+# since V4.03
+id_type_in_filename = ip
+
+# if store slave file use symbol link
+# default value is false
+# since V4.01
+store_slave_file_use_link = false
+
+# if rotate the error log every day
+# default value is false
+# since V4.02
+rotate_error_log = false
+
+# rotate error log time base, time format: Hour:Minute
+# Hour from 0 to 23, Minute from 0 to 59
+# default value is 00:00
+# since V4.02
+error_log_rotate_time=00:00
+
+# rotate error log when the log file exceeds this size
+# 0 means never rotates log file by log file size
+# default value is 0
+# since V4.02
+rotate_error_log_size = 0
+
+# keep days of the log files
+# 0 means do not delete old log files
+# default value is 0
+log_file_keep_days = 0
+
+# if use connection pool
+# default value is false
+# since V4.05
+use_connection_pool = false
+
+# connections whose the idle time exceeds this time will be closed
+# unit: second
+# default value is 3600
+# since V4.05
+connection_pool_max_idle_time = 3600
+
+# HTTP port on this tracker server
+http.server_port=8080
+
+# check storage HTTP server alive interval seconds
+# <= 0 for never check
+# default value is 30
+http.check_alive_interval=30
+
+# check storage HTTP server alive type, values are:
+#   tcp : connect to the storge server with HTTP port only, 
+#        do not request and get response
+#   http: storage check alive url must return http status 200
+# default value is tcp
+http.check_alive_type=tcp
+
+# check storage HTTP server alive uri/url
+# NOTE: storage embed HTTP server support uri: /status.html
+http.check_alive_uri=/status.html
+

docker/dockerfile_local/fastdfs.sh

@@ -0,0 +1,26 @@
+#!/bin/bash
+
+new_val=$FASTDFS_IPADDR
+old="com.ikingtech.ch116221"
+
+sed -i "s/$old/$new_val/g" /etc/fdfs/client.conf
+sed -i "s/$old/$new_val/g" /etc/fdfs/storage.conf
+sed -i "s/$old/$new_val/g" /etc/fdfs/mod_fastdfs.conf
+
+cat  /etc/fdfs/client.conf > /etc/fdfs/client.txt
+cat  /etc/fdfs/storage.conf >  /etc/fdfs/storage.txt
+cat  /etc/fdfs/mod_fastdfs.conf > /etc/fdfs/mod_fastdfs.txt
+
+mv /usr/local/nginx/conf/nginx.conf /usr/local/nginx/conf/nginx.conf.t
+cp /etc/fdfs/nginx.conf /usr/local/nginx/conf
+
+echo "start trackerd"
+/etc/init.d/fdfs_trackerd start
+
+echo "start storage"
+/etc/init.d/fdfs_storaged start
+
+echo "start nginx"
+/usr/local/nginx/sbin/nginx 
+
+tail -f  /dev/null

docker/dockerfile_network/Dockerfile

@@ -0,0 +1,39 @@
+# centos 7
+FROM centos
+# 添加配置文件
+ADD conf/client.conf /etc/fdfs/
+ADD conf/http.conf /etc/fdfs/
+ADD conf/mime.types /etc/fdfs/
+ADD conf/storage.conf /etc/fdfs/
+ADD conf/tracker.conf /etc/fdfs/
+ADD fastdfs.sh /home
+ADD conf/nginx.conf /etc/fdfs/
+ADD conf/mod_fastdfs.conf /etc/fdfs
+
+# run
+RUN yum install git gcc gcc-c ++ make automake autoconf libtool pcre pcre-devel zlib zlib-devel openssl-devel wget vim -y \
+  &&    cd /usr/local/src  \
+  &&    git clone https://github.com/happyfish100/libfastcommon.git --depth 1        \
+  &&    git clone https://github.com/happyfish100/fastdfs.git --depth 1    \
+  &&    git clone https://github.com/happyfish100/fastdfs-nginx-module.git --depth 1   \
+  &&    wget http://nginx.org/download/nginx-1.15.4.tar.gz    \
+  &&    tar -zxvf nginx-1.15.4.tar.gz    \
+  &&    mkdir /home/dfs   \
+  &&    cd /usr/local/src/  \
+  &&    cd libfastcommon/   \
+  &&    ./make.sh && ./make.sh install  \
+  &&    cd ../  \
+  &&    cd fastdfs/   \
+  &&    ./make.sh && ./make.sh install  \
+  &&    cd ../  \
+  &&    cd nginx-1.15.4/  \
+  &&    ./configure --add-module=/usr/local/src/fastdfs-nginx-module/src/   \
+  &&    make && make install  \
+  &&    chmod +x /home/fastdfs.sh
+
+
+# export config
+VOLUME /etc/fdfs
+
+EXPOSE 2122 23000 8888 80
+ENTRYPOINT ["/home/fastdfs.sh"]

docker/dockerfile_network/README.md

@@ -0,0 +1,45 @@
+# FastDFS Dockerfile network (网络版本)
+
+## 声明
+其实并没什么区别 教程是在上一位huayanYu(小锅盖)和 Wiki的作者 的基础上进行了一些修改，本质上还是huayanYu(小锅盖) 和 Wiki 上的作者写的教程
+
+
+## 目录介绍
+### conf 
+Dockerfile 所需要的一些配置文件
+当然你也可以对这些文件进行一些修改  比如 storage.conf 里面的 bast_path 等相关
+
+## 使用方法
+需要注意的是 你需要在运行容器的时候制定宿主机的ip 用参数 FASTDFS_IPADDR 来指定
+
+
+
+```
+docker run -d -e FASTDFS_IPADDR=192.168.1.234 -p 8888:8888 -p 22122:22122 -p 23000:23000 -p 8011:80 --name test-fast 镜像id/镜像名称
+```
+
+
+## 后记
+本质上 local 版本与  network 版本无区别
+
+
+
+
+## Statement
+In fact, there is no difference between the tutorials written by Huayan Yu and Wiki on the basis of their previous authors. In essence, they are also tutorials written by the authors of Huayan Yu and Wiki.
+
+## Catalogue introduction
+### conf 
+Dockerfile Some configuration files needed
+Of course, you can also make some modifications to these files, such as bast_path in storage. conf, etc.
+
+## Usage method
+Note that you need to specify the host IP when running the container with the parameter FASTDFS_IPADDR
+Here's a sample docker run instruction
+```
+docker run -d -e FASTDFS_IPADDR=192.168.1.234 -p 8888:8888 -p 22122:22122 -p 23000:23000 -p 8011:80 --name test-fast 镜像id/镜像名称
+```
+
+## Epilogue
+Essentially, there is no difference between the local version and the network version.
+

docker/dockerfile_network/conf/client.conf

@@ -0,0 +1,62 @@
+# connect timeout in seconds
+# default value is 30s
+connect_timeout=30
+
+# network timeout in seconds
+# default value is 30s
+network_timeout=60
+
+# the base path to store log files
+base_path=/home/dfs
+
+# tracker_server can ocur more than once, and tracker_server format is
+#  "host:port", host can be hostname or ip address
+tracker_server=com.ikingtech.ch116221:22122
+
+#standard log level as syslog, case insensitive, value list:
+### emerg for emergency
+### alert
+### crit for critical
+### error
+### warn for warning
+### notice
+### info
+### debug
+log_level=info
+
+# if use connection pool
+# default value is false
+# since V4.05
+use_connection_pool = false
+
+# connections whose the idle time exceeds this time will be closed
+# unit: second
+# default value is 3600
+# since V4.05
+connection_pool_max_idle_time = 3600
+
+# if load FastDFS parameters from tracker server
+# since V4.05
+# default value is false
+load_fdfs_parameters_from_tracker=false
+
+# if use storage ID instead of IP address
+# same as tracker.conf
+# valid only when load_fdfs_parameters_from_tracker is false
+# default value is false
+# since V4.05
+use_storage_id = false
+
+# specify storage ids filename, can use relative or absolute path
+# same as tracker.conf
+# valid only when load_fdfs_parameters_from_tracker is false
+# since V4.05
+storage_ids_filename = storage_ids.conf
+
+
+#HTTP settings
+http.tracker_server_port=80
+
+#use "#include" directive to include HTTP other settiongs
+##include http.conf
+

docker/dockerfile_network/conf/http.conf

@@ -0,0 +1,29 @@
+# HTTP default content type
+http.default_content_type = application/octet-stream
+
+# MIME types mapping filename
+# MIME types file format: MIME_type  extensions
+# such as:  image/jpeg	jpeg jpg jpe
+# you can use apache's MIME file: mime.types
+http.mime_types_filename=mime.types
+
+# if use token to anti-steal
+# default value is false (0)
+http.anti_steal.check_token=false
+
+# token TTL (time to live), seconds
+# default value is 600
+http.anti_steal.token_ttl=900
+
+# secret key to generate anti-steal token
+# this parameter must be set when http.anti_steal.check_token set to true
+# the length of the secret key should not exceed 128 bytes
+http.anti_steal.secret_key=FastDFS1234567890
+
+# return the content of the file when check token fail
+# default value is empty (no file sepecified)
+http.anti_steal.token_check_fail=/home/yuqing/fastdfs/conf/anti-steal.jpg
+
+# if support multi regions for HTTP Range
+# default value is true
+http.multi_range.enabed = true

docker/dockerfile_network/conf/mod_fastdfs.conf

@@ -0,0 +1,133 @@
+# connect timeout in seconds
+# default value is 30s
+connect_timeout=2
+
+# network recv and send timeout in seconds
+# default value is 30s
+network_timeout=30
+
+# the base path to store log files
+base_path=/tmp
+
+# if load FastDFS parameters from tracker server
+# since V1.12
+# default value is false
+load_fdfs_parameters_from_tracker=true
+
+# storage sync file max delay seconds
+# same as tracker.conf
+# valid only when load_fdfs_parameters_from_tracker is false
+# since V1.12
+# default value is 86400 seconds (one day)
+storage_sync_file_max_delay = 86400
+
+# if use storage ID instead of IP address
+# same as tracker.conf
+# valid only when load_fdfs_parameters_from_tracker is false
+# default value is false
+# since V1.13
+use_storage_id = false
+
+# specify storage ids filename, can use relative or absolute path
+# same as tracker.conf
+# valid only when load_fdfs_parameters_from_tracker is false
+# since V1.13
+storage_ids_filename = storage_ids.conf
+
+# FastDFS tracker_server can ocur more than once, and tracker_server format is
+#  "host:port", host can be hostname or ip address
+# valid only when load_fdfs_parameters_from_tracker is true
+tracker_server=com.ikingtech.ch116221:22122
+
+# the port of the local storage server
+# the default value is 23000
+storage_server_port=23000
+
+# the group name of the local storage server
+group_name=group1
+
+# if the url / uri including the group name
+# set to false when uri like /M00/00/00/xxx
+# set to true when uri like ${group_name}/M00/00/00/xxx, such as group1/M00/xxx
+# default value is false
+url_have_group_name = true
+
+# path(disk or mount point) count, default value is 1
+# must same as storage.conf
+store_path_count=1
+
+# store_path#, based 0, if store_path0 not exists, it's value is base_path
+# the paths must be exist
+# must same as storage.conf
+store_path0=/home/dfs
+#store_path1=/home/yuqing/fastdfs1
+
+# standard log level as syslog, case insensitive, value list:
+### emerg for emergency
+### alert
+### crit for critical
+### error
+### warn for warning
+### notice
+### info
+### debug
+log_level=info
+
+# set the log filename, such as /usr/local/apache2/logs/mod_fastdfs.log
+# empty for output to stderr (apache and nginx error_log file)
+log_filename=
+
+# response mode when the file not exist in the local file system
+## proxy: get the content from other storage server, then send to client
+## redirect: redirect to the original storage server (HTTP Header is Location)
+response_mode=proxy
+
+# the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a
+# multi aliases split by comma. empty value means auto set by OS type
+# this paramter used to get all ip address of the local host
+# default values is empty
+if_alias_prefix=
+
+# use "#include" directive to include HTTP config file
+# NOTE: #include is an include directive, do NOT remove the # before include
+#include http.conf
+
+
+# if support flv
+# default value is false
+# since v1.15
+flv_support = true
+
+# flv file extension name
+# default value is flv
+# since v1.15
+flv_extension = flv
+
+
+# set the group count
+# set to none zero to support multi-group on this storage server
+# set to 0  for single group only
+# groups settings section as [group1], [group2], ..., [groupN]
+# default value is 0
+# since v1.14
+group_count = 0
+
+# group settings for group #1
+# since v1.14
+# when support multi-group on this storage server, uncomment following section
+#[group1]
+#group_name=group1
+#storage_server_port=23000
+#store_path_count=2
+#store_path0=/home/yuqing/fastdfs
+#store_path1=/home/yuqing/fastdfs1
+
+# group settings for group #2
+# since v1.14
+# when support multi-group, uncomment following section as neccessary
+#[group2]
+#group_name=group2
+#storage_server_port=23000
+#store_path_count=1
+#store_path0=/home/yuqing/fastdfs
+

docker/dockerfile_network/conf/nginx.conf

@@ -0,0 +1,127 @@
+
+#user  nobody;
+worker_processes  1;
+
+#error_log  logs/error.log;
+#error_log  logs/error.log  notice;
+#error_log  logs/error.log  info;
+
+#pid        logs/nginx.pid;
+
+
+events {
+    worker_connections  1024;
+}
+
+
+http {
+    include       mime.types;
+    default_type  application/octet-stream;
+
+    #log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
+    #                  '$status $body_bytes_sent "$http_referer" '
+    #                  '"$http_user_agent" "$http_x_forwarded_for"';
+
+    #access_log  logs/access.log  main;
+
+    sendfile        on;
+    #tcp_nopush     on;
+
+    #keepalive_timeout  0;
+    keepalive_timeout  65;
+
+    #gzip  on;
+
+    server {
+        listen       80;
+        server_name  localhost;
+
+        #charset koi8-r;
+
+        #access_log  logs/host.access.log  main;
+
+        location / {
+            root   html;
+            index  index.html index.htm;
+        }
+
+        #error_page  404              /404.html;
+
+        # redirect server error pages to the static page /50x.html
+        #
+        error_page   500 502 503 504  /50x.html;
+        location = /50x.html {
+            root   html;
+        }
+
+        # proxy the PHP scripts to Apache listening on 127.0.0.1:80
+        #
+        #location ~ \.php$ {
+        #    proxy_pass   http://127.0.0.1;
+        #}
+
+        # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
+        #
+        #location ~ \.php$ {
+        #    root           html;
+        #    fastcgi_pass   127.0.0.1:9000;
+        #    fastcgi_index  index.php;
+        #    fastcgi_param  SCRIPT_FILENAME  /scripts$fastcgi_script_name;
+        #    include        fastcgi_params;
+        #}
+
+        # deny access to .htaccess files, if Apache's document root
+        # concurs with nginx's one
+        #
+        #location ~ /\.ht {
+        #    deny  all;
+        #}
+    }
+    server {
+        listen       8888;
+        server_name  localhost;
+        location ~/group[0-9]/ {
+            ngx_fastdfs_module;
+        }
+        error_page   500 502 503 504  /50x.html;
+        location = /50x.html {
+        root   html;
+        }
+    }
+
+    # another virtual host using mix of IP-, name-, and port-based configuration
+    #
+    #server {
+    #    listen       8000;
+    #    listen       somename:8080;
+    #    server_name  somename  alias  another.alias;
+
+    #    location / {
+    #        root   html;
+    #        index  index.html index.htm;
+    #    }
+    #}
+
+
+    # HTTPS server
+    #
+    #server {
+    #    listen       443 ssl;
+    #    server_name  localhost;
+
+    #    ssl_certificate      cert.pem;
+    #    ssl_certificate_key  cert.key;
+
+    #    ssl_session_cache    shared:SSL:1m;
+    #    ssl_session_timeout  5m;
+
+    #    ssl_ciphers  HIGH:!aNULL:!MD5;
+    #    ssl_prefer_server_ciphers  on;
+
+    #    location / {
+    #        root   html;
+    #        index  index.html index.htm;
+    #    }
+    #}
+
+}

docker/dockerfile_network/conf/storage.conf

@@ -0,0 +1,287 @@
+# is this config file disabled
+# false for enabled
+# true for disabled
+disabled=false
+
+# the name of the group this storage server belongs to
+#
+# comment or remove this item for fetching from tracker server,
+# in this case, use_storage_id must set to true in tracker.conf,
+# and storage_ids.conf must be configed correctly.
+group_name=group1
+
+# bind an address of this host
+# empty for bind all addresses of this host
+bind_addr=
+
+# if bind an address of this host when connect to other servers 
+# (this storage server as a client)
+# true for binding the address configed by above parameter: "bind_addr"
+# false for binding any address of this host
+client_bind=true
+
+# the storage server port
+port=23000
+
+# connect timeout in seconds
+# default value is 30s
+connect_timeout=10
+
+# network timeout in seconds
+# default value is 30s
+network_timeout=60
+
+# heart beat interval in seconds
+heart_beat_interval=30
+
+# disk usage report interval in seconds
+stat_report_interval=60
+
+# the base path to store data and log files
+base_path=/home/dfs
+
+# max concurrent connections the server supported
+# default value is 256
+# more max_connections means more memory will be used
+# you should set this parameter larger, eg. 10240
+max_connections=1024
+
+# the buff size to recv / send data
+# this parameter must more than 8KB
+# default value is 64KB
+# since V2.00
+buff_size = 256KB
+
+# accept thread count
+# default value is 1
+# since V4.07
+accept_threads=1
+
+# work thread count, should <= max_connections
+# work thread deal network io
+# default value is 4
+# since V2.00
+work_threads=4
+
+# if disk read / write separated
+##  false for mixed read and write
+##  true for separated read and write
+# default value is true
+# since V2.00
+disk_rw_separated = true
+
+# disk reader thread count per store base path
+# for mixed read / write, this parameter can be 0
+# default value is 1
+# since V2.00
+disk_reader_threads = 1
+
+# disk writer thread count per store base path
+# for mixed read / write, this parameter can be 0
+# default value is 1
+# since V2.00
+disk_writer_threads = 1
+
+# when no entry to sync, try read binlog again after X milliseconds
+# must > 0, default value is 200ms
+sync_wait_msec=50
+
+# after sync a file, usleep milliseconds
+# 0 for sync successively (never call usleep)
+sync_interval=0
+
+# storage sync start time of a day, time format: Hour:Minute
+# Hour from 0 to 23, Minute from 0 to 59
+sync_start_time=00:00
+
+# storage sync end time of a day, time format: Hour:Minute
+# Hour from 0 to 23, Minute from 0 to 59
+sync_end_time=23:59
+
+# write to the mark file after sync N files
+# default value is 500
+write_mark_file_freq=500
+
+# path(disk or mount point) count, default value is 1
+store_path_count=1
+
+# store_path#, based 0, if store_path0 not exists, it's value is base_path
+# the paths must be exist
+store_path0=/home/dfs
+#store_path1=/home/dfs2
+
+# subdir_count  * subdir_count directories will be auto created under each 
+# store_path (disk), value can be 1 to 256, default value is 256
+subdir_count_per_path=256
+
+# tracker_server can ocur more than once, and tracker_server format is
+#  "host:port", host can be hostname or ip address
+tracker_server=com.ikingtech.ch116221:22122
+
+
+#standard log level as syslog, case insensitive, value list:
+### emerg for emergency
+### alert
+### crit for critical
+### error
+### warn for warning
+### notice
+### info
+### debug
+log_level=info
+
+#unix group name to run this program, 
+#not set (empty) means run by the group of current user
+run_by_group=
+
+#unix username to run this program,
+#not set (empty) means run by current user
+run_by_user=
+
+# allow_hosts can ocur more than once, host can be hostname or ip address,
+# "*" (only one asterisk) means match all ip addresses
+# we can use CIDR ips like 192.168.5.64/26
+# and also use range like these: 10.0.1.[0-254] and host[01-08,20-25].domain.com
+# for example:
+# allow_hosts=10.0.1.[1-15,20]
+# allow_hosts=host[01-08,20-25].domain.com
+# allow_hosts=192.168.5.64/26
+allow_hosts=*
+
+# the mode of the files distributed to the data path
+# 0: round robin(default)
+# 1: random, distributted by hash code
+file_distribute_path_mode=0
+
+# valid when file_distribute_to_path is set to 0 (round robin), 
+# when the written file count reaches this number, then rotate to next path
+# default value is 100
+file_distribute_rotate_count=100
+
+# call fsync to disk when write big file
+# 0: never call fsync
+# other: call fsync when written bytes >= this bytes
+# default value is 0 (never call fsync)
+fsync_after_written_bytes=0
+
+# sync log buff to disk every interval seconds
+# must > 0, default value is 10 seconds
+sync_log_buff_interval=10
+
+# sync binlog buff / cache to disk every interval seconds
+# default value is 60 seconds
+sync_binlog_buff_interval=10
+
+# sync storage stat info to disk every interval seconds
+# default value is 300 seconds
+sync_stat_file_interval=300
+
+# thread stack size, should >= 512KB
+# default value is 512KB
+thread_stack_size=512KB
+
+# the priority as a source server for uploading file.
+# the lower this value, the higher its uploading priority.
+# default value is 10
+upload_priority=10
+
+# the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a
+# multi aliases split by comma. empty value means auto set by OS type
+# default values is empty
+if_alias_prefix=
+
+# if check file duplicate, when set to true, use FastDHT to store file indexes
+# 1 or yes: need check
+# 0 or no: do not check
+# default value is 0
+check_file_duplicate=0
+
+# file signature method for check file duplicate
+## hash: four 32 bits hash code
+## md5: MD5 signature
+# default value is hash
+# since V4.01
+file_signature_method=hash
+
+# namespace for storing file indexes (key-value pairs)
+# this item must be set when check_file_duplicate is true / on
+key_namespace=FastDFS
+
+# set keep_alive to 1 to enable persistent connection with FastDHT servers
+# default value is 0 (short connection)
+keep_alive=0
+
+# you can use "#include filename" (not include double quotes) directive to 
+# load FastDHT server list, when the filename is a relative path such as 
+# pure filename, the base path is the base path of current/this config file.
+# must set FastDHT server list when check_file_duplicate is true / on
+# please see INSTALL of FastDHT for detail
+##include /home/yuqing/fastdht/conf/fdht_servers.conf
+
+# if log to access log
+# default value is false
+# since V4.00
+use_access_log = false
+
+# if rotate the access log every day
+# default value is false
+# since V4.00
+rotate_access_log = false
+
+# rotate access log time base, time format: Hour:Minute
+# Hour from 0 to 23, Minute from 0 to 59
+# default value is 00:00
+# since V4.00
+access_log_rotate_time=00:00
+
+# if rotate the error log every day
+# default value is false
+# since V4.02
+rotate_error_log = false
+
+# rotate error log time base, time format: Hour:Minute
+# Hour from 0 to 23, Minute from 0 to 59
+# default value is 00:00
+# since V4.02
+error_log_rotate_time=00:00
+
+# rotate access log when the log file exceeds this size
+# 0 means never rotates log file by log file size
+# default value is 0
+# since V4.02
+rotate_access_log_size = 0
+
+# rotate error log when the log file exceeds this size
+# 0 means never rotates log file by log file size
+# default value is 0
+# since V4.02
+rotate_error_log_size = 0
+
+# keep days of the log files
+# 0 means do not delete old log files
+# default value is 0
+log_file_keep_days = 0
+
+# if skip the invalid record when sync file
+# default value is false
+# since V4.02
+file_sync_skip_invalid_record=false
+
+# if use connection pool
+# default value is false
+# since V4.05
+use_connection_pool = false
+
+# connections whose the idle time exceeds this time will be closed
+# unit: second
+# default value is 3600
+# since V4.05
+connection_pool_max_idle_time = 3600
+
+# use the ip address of this storage server if domain_name is empty,
+# else this domain name will ocur in the url redirected by the tracker server
+http.domain_name=
+
+# the port of the web server on this storage server
+http.server_port=8888
+

docker/dockerfile_network/conf/tracker.conf

@@ -0,0 +1,278 @@
+# is this config file disabled
+# false for enabled
+# true for disabled
+disabled=false
+
+# bind an address of this host
+# empty for bind all addresses of this host
+bind_addr=
+
+# the tracker server port
+port=22122
+
+# connect timeout in seconds
+# default value is 30s
+connect_timeout=10
+
+# network timeout in seconds
+# default value is 30s
+network_timeout=60
+
+# the base path to store data and log files
+base_path=/home/dfs
+
+# max concurrent connections this server supported
+# you should set this parameter larger, eg. 102400
+max_connections=1024
+
+# accept thread count
+# default value is 1
+# since V4.07
+accept_threads=1
+
+# work thread count, should <= max_connections
+# default value is 4
+# since V2.00
+work_threads=4
+
+# min buff size
+# default value 8KB
+min_buff_size = 8KB
+
+# max buff size
+# default value 128KB
+max_buff_size = 128KB
+
+# the method of selecting group to upload files
+# 0: round robin
+# 1: specify group
+# 2: load balance, select the max free space group to upload file
+store_lookup=2
+
+# which group to upload file
+# when store_lookup set to 1, must set store_group to the group name
+store_group=group2
+
+# which storage server to upload file
+# 0: round robin (default)
+# 1: the first server order by ip address
+# 2: the first server order by priority (the minimal)
+# Note: if use_trunk_file set to true, must set store_server to 1 or 2
+store_server=0
+
+# which path(means disk or mount point) of the storage server to upload file
+# 0: round robin
+# 2: load balance, select the max free space path to upload file
+store_path=0
+
+# which storage server to download file
+# 0: round robin (default)
+# 1: the source storage server which the current file uploaded to
+download_server=0
+
+# reserved storage space for system or other applications.
+# if the free(available) space of any stoarge server in 
+# a group <= reserved_storage_space, 
+# no file can be uploaded to this group.
+# bytes unit can be one of follows:
+### G or g for gigabyte(GB)
+### M or m for megabyte(MB)
+### K or k for kilobyte(KB)
+### no unit for byte(B)
+### XX.XX% as ratio such as reserved_storage_space = 10%
+reserved_storage_space = 1%
+
+#standard log level as syslog, case insensitive, value list:
+### emerg for emergency
+### alert
+### crit for critical
+### error
+### warn for warning
+### notice
+### info
+### debug
+log_level=info
+
+#unix group name to run this program, 
+#not set (empty) means run by the group of current user
+run_by_group=
+
+#unix username to run this program,
+#not set (empty) means run by current user
+run_by_user=
+
+# allow_hosts can ocur more than once, host can be hostname or ip address,
+# "*" (only one asterisk) means match all ip addresses
+# we can use CIDR ips like 192.168.5.64/26
+# and also use range like these: 10.0.1.[0-254] and host[01-08,20-25].domain.com
+# for example:
+# allow_hosts=10.0.1.[1-15,20]
+# allow_hosts=host[01-08,20-25].domain.com
+# allow_hosts=192.168.5.64/26
+allow_hosts=*
+
+# sync log buff to disk every interval seconds
+# default value is 10 seconds
+sync_log_buff_interval = 10
+
+# check storage server alive interval seconds
+check_active_interval = 120
+
+# thread stack size, should >= 64KB
+# default value is 64KB
+thread_stack_size = 64KB
+
+# auto adjust when the ip address of the storage server changed
+# default value is true
+storage_ip_changed_auto_adjust = true
+
+# storage sync file max delay seconds
+# default value is 86400 seconds (one day)
+# since V2.00
+storage_sync_file_max_delay = 86400
+
+# the max time of storage sync a file
+# default value is 300 seconds
+# since V2.00
+storage_sync_file_max_time = 300
+
+# if use a trunk file to store several small files
+# default value is false
+# since V3.00
+use_trunk_file = false 
+
+# the min slot size, should <= 4KB
+# default value is 256 bytes
+# since V3.00
+slot_min_size = 256
+
+# the max slot size, should > slot_min_size
+# store the upload file to trunk file when it's size <=  this value
+# default value is 16MB
+# since V3.00
+slot_max_size = 16MB
+
+# the trunk file size, should >= 4MB
+# default value is 64MB
+# since V3.00
+trunk_file_size = 64MB
+
+# if create trunk file advancely
+# default value is false
+# since V3.06
+trunk_create_file_advance = false
+
+# the time base to create trunk file
+# the time format: HH:MM
+# default value is 02:00
+# since V3.06
+trunk_create_file_time_base = 02:00
+
+# the interval of create trunk file, unit: second
+# default value is 38400 (one day)
+# since V3.06
+trunk_create_file_interval = 86400
+
+# the threshold to create trunk file
+# when the free trunk file size less than the threshold, will create 
+# the trunk files
+# default value is 0
+# since V3.06
+trunk_create_file_space_threshold = 20G
+
+# if check trunk space occupying when loading trunk free spaces
+# the occupied spaces will be ignored
+# default value is false
+# since V3.09
+# NOTICE: set this parameter to true will slow the loading of trunk spaces 
+# when startup. you should set this parameter to true when neccessary.
+trunk_init_check_occupying = false
+
+# if ignore storage_trunk.dat, reload from trunk binlog
+# default value is false
+# since V3.10
+# set to true once for version upgrade when your version less than V3.10
+trunk_init_reload_from_binlog = false
+
+# the min interval for compressing the trunk binlog file
+# unit: second
+# default value is 0, 0 means never compress
+# FastDFS compress the trunk binlog when trunk init and trunk destroy
+# recommand to set this parameter to 86400 (one day)
+# since V5.01
+trunk_compress_binlog_min_interval = 0
+
+# if use storage ID instead of IP address
+# default value is false
+# since V4.00
+use_storage_id = false
+
+# specify storage ids filename, can use relative or absolute path
+# since V4.00
+storage_ids_filename = storage_ids.conf
+
+# id type of the storage server in the filename, values are:
+## ip: the ip address of the storage server
+## id: the server id of the storage server
+# this paramter is valid only when use_storage_id set to true
+# default value is ip
+# since V4.03
+id_type_in_filename = ip
+
+# if store slave file use symbol link
+# default value is false
+# since V4.01
+store_slave_file_use_link = false
+
+# if rotate the error log every day
+# default value is false
+# since V4.02
+rotate_error_log = false
+
+# rotate error log time base, time format: Hour:Minute
+# Hour from 0 to 23, Minute from 0 to 59
+# default value is 00:00
+# since V4.02
+error_log_rotate_time=00:00
+
+# rotate error log when the log file exceeds this size
+# 0 means never rotates log file by log file size
+# default value is 0
+# since V4.02
+rotate_error_log_size = 0
+
+# keep days of the log files
+# 0 means do not delete old log files
+# default value is 0
+log_file_keep_days = 0
+
+# if use connection pool
+# default value is false
+# since V4.05
+use_connection_pool = false
+
+# connections whose the idle time exceeds this time will be closed
+# unit: second
+# default value is 3600
+# since V4.05
+connection_pool_max_idle_time = 3600
+
+# HTTP port on this tracker server
+http.server_port=8080
+
+# check storage HTTP server alive interval seconds
+# <= 0 for never check
+# default value is 30
+http.check_alive_interval=30
+
+# check storage HTTP server alive type, values are:
+#   tcp : connect to the storge server with HTTP port only, 
+#        do not request and get response
+#   http: storage check alive url must return http status 200
+# default value is tcp
+http.check_alive_type=tcp
+
+# check storage HTTP server alive uri/url
+# NOTE: storage embed HTTP server support uri: /status.html
+http.check_alive_uri=/status.html
+

docker/dockerfile_network/fastdfs.sh

@@ -0,0 +1,26 @@
+#!/bin/bash
+
+new_val=$FASTDFS_IPADDR
+old="com.ikingtech.ch116221"
+
+sed -i "s/$old/$new_val/g" /etc/fdfs/client.conf
+sed -i "s/$old/$new_val/g" /etc/fdfs/storage.conf
+sed -i "s/$old/$new_val/g" /etc/fdfs/mod_fastdfs.conf
+
+cat  /etc/fdfs/client.conf > /etc/fdfs/client.txt
+cat  /etc/fdfs/storage.conf >  /etc/fdfs/storage.txt
+cat  /etc/fdfs/mod_fastdfs.conf > /etc/fdfs/mod_fastdfs.txt
+
+mv /usr/local/nginx/conf/nginx.conf /usr/local/nginx/conf/nginx.conf.t
+cp /etc/fdfs/nginx.conf /usr/local/nginx/conf
+
+echo "start trackerd"
+/etc/init.d/fdfs_trackerd start
+
+echo "start storage"
+/etc/init.d/fdfs_storaged start
+
+echo "start nginx"
+/usr/local/nginx/sbin/nginx 
+
+tail -f  /dev/null